TIBALCUT-FCPS

Special Purpose Neat Oil
DESCRIPTION

TIBALCUT-FCPS
are high-grade neat cutting oils. They are blended with high viscosity index oils and imparted with active sulphur, chlorine, phosphorus and fats to provide excellent weld load carrying capacity to perform under any drastic conditions.

TIBALCUT- FCPS are straight cutting oils and are used as such without any dilution. This is applied copiously to thoroughly flood the work tool chip area to derive maximum benefits of cooling so vitally needed to increase tool life and production.

APPLICATION
TIBALCUT-FCPS oils are recommended for deep hole drilling trepanning operations. These oils can also be used for gear hobbing, gear shaving and broaching operations on ferrous metals only. These oils are forbidden on cuprous and yellow metals.

GRADES AVAILABLE
TIBALCUT-FCPS 12
TIBALCUT-FCPS 25
TIBALCUT-FCPS 45

PERFORMANCE BENEFITS
Has superior cooling and lubricating properties, which contribute towards clean work, excellent surface finish and minimum tool wear
Protects work-piece, machine components, and tool materials from rust and corrosion.
Enables obtain superior finish and accurate tolerances to the parts machined.

Typical Characteristics